Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Kannapolis
If you live in one of Kannapolis’s mill-era bungalows and something about your chimney feels off, you’re in the right place. We know this housing stock. Much of Kannapolis was built for textile workers between the 1920s and 1950s, and those chimneys were engineered for coal, not wood, and certainly not for the modern heating appliances people vent into them now. That history changes how a chimney here should be diagnosed and repaired. A Level 2 inspection with a camera is where we start, because we won’t recommend a single dollar of work you can’t watch happen on a screen. Call (855) 658-5324. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Kannapolis Homeowners Call Chimney Sweep University City for Chimney Repair
Chimney Sweep University City is a chimney specialist, not a generalist with a brush and a ladder. We handle the whole system, from the firebox floor to the chimney crown, so you’re not passed off to a second contractor when the inspection turns up something structural. That matters in a town where “structural” is the norm rather than the exception.
Our technicians have up to 8 years of experience, and they’re trained to recognize exactly what they’re looking at in an older Kannapolis chimney: coal-era flues, first-generation liners that have already been retired once, and brickwork that’s been through seventy Piedmont winters. When a homeowner asks why we recommend a repair, we show them the footage and explain the reasoning.
We serve Kannapolis and the surrounding area with fast dispatch from 7am to 7pm, Sunday through Friday, and you can see how we handle the full spectrum of work on our chimney repair page. The estimate is free, the price is set per job by the written estimate, and nothing gets added after the fact.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Kannapolis
Kannapolis chimneys fail in a few predictable ways. Here’s what we fix most often and why the local climate makes it necessary.
Mortar Repointing
The freeze-thaw swings that come through the Piedmont each winter work on mortar joints in a slow cycle: moisture seeps in, freezes, expands, and pops the joint loose. On an exterior stack in Kannapolis, this shows up first on the exposed faces above the roofline. Repointing means grinding out the failed mortar and packing in fresh material matched to what’s already there, so the repair reads as part of the chimney rather than a patch on top of it.
Spalling Brick Repair
Spalling is what happens when water gets behind a brick face and the freeze pushes the surface off in flakes or chunks. Mill-era brick is especially vulnerable because the mortar that held it was never intended to face this much moisture cycling. We replace the damaged units with brick of matching size and color, then address the underlying moisture path so the new brick doesn’t suffer the same fate.
Chimney Waterproofing
Waterproofing is the cheapest repair on this list and the one most likely to prevent the others. A breathable masonry sealer applied to the stack keeps bulk water out while letting the brick dry from the inside, which matters enormously in humid North Carolina summers when a damp flue can hold moisture for weeks. We treat waterproofing as preventive engineering, not an upsell.
Flashing Repair
Flashing is the metal that bridges the gap between your chimney and the roof plane, and when it fails you get water in the attic and a rusted damper two floors down. We repair or replace flashing with correctly sized material and proper counter-flashing at the masonry, because a bead of caulk over an old seam is a temporary fix disguised as a permanent one.
Trusted Brands We Service in Kannapolis
We install and work with professional-grade chimney materials, including DuraFlex flexible stainless liners, HeatShield ceramic flue resurfacing, Olympia Chimney components, and Famco caps and accessories. These are the same supply lines certified chimney specialists use nationwide, and they’re what we specify when we quote a repair. We don’t claim to stock parts locally, and we won’t tell you we have something on hand when we don’t. What we can promise is a clear answer on what your chimney needs, which material is right for it, and a turnaround that doesn’t drag on for weeks.

Common Chimney Repair Problems We See in Kannapolis Homes
- Liner joints failing for a second time. Many coal-era flues were relined once for wood and are now showing cracks at the liner joints again. A contractor who skips the camera can miss a second-degree creosote glaze hiding behind the old liner, which is exactly why we don’t skip the camera.
- Freeze-thaw damage to the crown and exterior joints. Piedmont winters crack chimney crowns and open mortar joints on outside stacks, and that lets water migrate into the smoke chamber where it spalls the brick faces from behind.
- Missing caps and rusted dampers. Mill-village chimneys often went without a proper cap, so rain and animals have had decades of open access to the flue. The resulting draft problems look like a sweeping issue and get misdiagnosed as one.
- Legacy cleanout doors and shallow fireboxes. Coal-era chimneys have narrow liners and fireboxes built for a shallow coal fire, not a modern appliance. That geometry is the single biggest factor in whether a repair is safe and code-compliant.
See the difference
Before
After
Before
After
Before
AfterHow to Spot a Coal-Era Flue in Your Kannapolis Home
In Kannapolis’s mill-era neighborhoods, the giveaway is usually the basement or crawlspace. If you find a small cast-iron or steel door set into the brick near the base of the chimney, that’s a coal cleanout, and it tells you the flue was originally built to burn coal and was later converted to wood. What most homeowners don’t realize is that these chimneys have often already been relined once, and the first liner was sized for a shallow coal firebox, not the appliance now venting into it. That’s why so many calls here end with a second reline rather than a simple sweep. The fix, when it’s the right one, is a properly sized DuraFlex stainless liner that matches the flue’s actual geometry.
Pricing for Chimney Repair in Kannapolis, NC
A typical mortar repointing job in Kannapolis runs $500 – $1,200 depending on how much of the stack is affected. Chimney waterproofing generally runs $350 – $650 for a standard residential stack. Flashing repair typically falls between $300 – $800, and spalling brick repair runs $400 – $1,400 depending on how many units need replacing. A HeatShield ceramic resurfacing job is typically $1,500 – $3,000, and a full DuraFlex reline generally runs $3,000 – $6,000 depending on flue length and configuration. These are estimated ranges for the local market, and the written estimate from your inspection sets the final price. Nothing gets added without your approval.
We Also Serve Cities Near Kannapolis
We take chimney repair calls across the region, including Concord, Harrisburg, Kannapolis, Davidson, and University City. If you’re just outside the city limits, call and we’ll confirm coverage when we book your appointment. The same inspection process and the same materials apply anywhere in the area.
Serving Kannapolis, NC – Our Local Coverage Area
We serve Kannapolis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Kannapolis
Look for a small metal cleanout door in the basement or crawlspace at the base of the chimney. That door fed the coal fire, and it’s the clearest indicator that your flue was built for coal and later converted to wood. If you find one, have the flue inspected before you burn anything in it. Call (855) 658-5324 to schedule an inspection.
Sometimes, yes, but only after the camera shows exactly where the joints are failing. Spot repairs are possible when the damage is isolated and the tile isn’t displaced; when the joints are failing along a long run or the tile has shifted, a HeatShield resurfacing or a DuraFlex liner is the safer answer. We’ll show you the footage and explain which applies to your flue before you commit to anything.
The leak usually isn’t the flashing at all. It’s most often the chimney crown, a cracked mortar joint, or a spalling brick face letting water in above the roofline where you can’t see it from the ground. We inspect the whole exterior stack, not just the roof connection, so the actual source gets found and repaired. Call (855) 658-5324 for an exact quote: the estimate is free.
Third-degree creosote is a hardened, glazed layer that has baked onto the flue wall and cannot be removed with a standard brush. In a coal-era flue that’s been relined once, it can hide behind the old liner where it’s nearly impossible to detect without a camera. That’s why we run a Level 2 inspection on any older Kannapolis chimney before recommending repair work. Call us to book one.
No. We don’t recommend a repair without camera evidence you can see for yourself. The footage is part of the inspection, and if the camera shows the chimney is fine, we’ll tell you so and let you know when the work can safely wait. Call (855) 658-5324 to schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Ready for a straight answer about your chimney? Call (855) 658-5324 for a free estimate. A technician dispatches from 7am to 7pm, Sunday through Friday, and we’ll start with a camera inspection so you can see exactly what’s going on before anything is recommended.
Written by the team at Chimney Sweep University City.