Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for University City Homeowners
You might notice a draft coming down the flue in January, a faint smoke smell that lingers after the fire dies, or dark glazing on the firebox walls that scrubbing won’t lift. Those are exactly the conditions a chimney inspection is built to sort out, and in University City they come up most after a long burn season. Our technicians have up to 8 years of experience reading what a flue, a firebox, and a crown are telling them, and a strong local reputation among homeowners who want the findings explained, not just handed down. We answer 24/7 and offer same-day scheduling where the day allows, so call (855) 658-5324 to book.
What Our Chimney Inspection Service Includes
An inspection isn’t one fixed visit. The industry splits it into three levels depending on what has to be seen, and we cover all three along with camera and flue work. From the firebox floor to the chimney crown, we check the whole system rather than the flue alone.
Level 1 Inspection
A Level 1 inspection is the standard annual check of all readily accessible parts of your chimney and venting system, with no tools needed to open anything up. You need it once a year if your fireplace and chimney are working normally, your fuel type hasn’t changed, and you’re not buying or selling the house. In University City we use it as the baseline visit: we look at the firebox, damper, smoke chamber, flue interior as visible from the top and bottom, cap, and crown, then tell you plainly what’s fine and what isn’t.
Level 2 Inspection
A Level 2 inspection goes further and is required whenever a property changes hands, after a chimney fire or earthquake, after an operational change like switching fuels or swapping an appliance, or when you’ve had a persistent problem nobody has pinned down. It includes everything in a Level 1 plus a camera scan of the flue and inspection of accessible attic, crawlspace, and basement areas where the chimney passes through. This is the level we run for real estate transactions and the one we reach for when a Level 1 turns up something that needs a closer look.
Level 3 Inspection
A Level 3 inspection is the most involved and is only recommended when a Level 1 or Level 2 finds a serious hazard that can’t be assessed otherwise, and it can involve removing parts of the building to gain access. You typically see it when there’s suspected damage to concealed chimney structure, like a cracked inner wythe or separation inside the chase. We don’t jump here lightly. When a Level 3 is warranted, we explain exactly what has to be opened and why before anything is touched, so you can weigh the evidence.
Camera Inspection
A camera inspection runs a specialized flue camera down the chimney so we can see the entire liner surface, including offsets and areas the eye can’t reach from the firebox. It’s how we spot cracked flue tiles, gaps at joints, heavy glazed creosote, and debris that a top-down glance would miss. In University City it’s part of every Level 2 we do, and the photo record is yours to keep.
Flue Inspection
A flue inspection focuses on the flue itself: its size relative to the appliance, the condition of clay tiles or a stainless liner, and whether the flue is clear and drafting correctly. It’s the right first step when you’re getting smoke rollback into the room or a weak draft. We check flue sizing and condition against what your appliance actually needs, and we tell you if the cause is a simple blockage or something structural.
Real Estate Inspection
A real estate inspection is a Level 2 done for a sale, refinance, or insurance requirement, and it produces documentation a lender, agent, or buyer can rely on. It’s needed whenever a home changes hands, which in this part of North Carolina happens constantly. We provide a written report with camera photos, so both sides of a transaction are looking at the same evidence instead of a verbal opinion.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
Chimney components wear in predictable ways, and knowing a maker’s hardware helps us read what we’re looking at. We work with Olympia Chimney products, from caps to venting, and know where their components tend to wear and what to check at the joints. With Famco, we’re familiar with the cap and venting hardware common on this region’s homes and know how those assemblies age.
We also work with Copperfield components and with DuraFlex flexible stainless liners, so when an inspection turns up a flue that needs relining, we already know the system that’s likely to fit it. Whether you have Olympia Chimney, Famco, Copperfield, or any other make, we can help, and we’ll tell you what the inspection found rather than what a particular brand prefers.
Signs You Need Chimney Inspection Right Now
Some symptoms can wait for the annual visit. Others shouldn’t, and these are the ones we’d want to see sooner rather than later.
- Smoke backing into the room. If smoke rolls back into the room instead of up the flue, the draft is compromised, which usually means a blockage, a sizing problem, or a damaged flue. It’s worth a look before your next fire rather than after.
- A strong smoke or creosote smell even when you’re not burning. A smell that lingers when the fireplace is cold often points to creosote buildup or a draft issue pulling flue odors back inside. It’s a sign the flue needs to be checked, and sometimes a sign it needs sweeping before inspection.
- Dark glazing or flaking on the firebox walls. Shiny, tar-like glazed creosote is a sign of incomplete combustion and won’t come off with a brush. It’s a fire concern, and camera inspection tells us how far up the flue it goes.
- Water stains or rust inside the firebox. Moisture getting past a failing cap or crown shows up as staining, rust, or crumbling mortar. Left alone, it damages the flue and the structure around it.
- A recent chimney fire, however small. Even a fire you think you caught in time can crack flue tiles you can’t see from the firebox. A Level 2 inspection after a fire is the standard, not an upsell.
Our Chimney Inspection Process – Step by Step
You’ll know what we’re doing at each stage, and nothing gets recommended without evidence you can see for yourself.
- 1
We start with a conversation. We ask what you’ve noticed, how often you burn, and what fuel you use. That context shapes where we look first and keeps the visit focused on your actual problem.
- 2
We inspect the accessible system visually. Firebox, damper, smoke chamber, flue as visible from top and bottom, cap, crown, and the exterior. This is the Level 1 foundation, and we note condition and evidence as we go.
- 3
We run a camera down the flue when the level calls for it. A specialized flue camera lets us see the liner surface, joints, and any offset that a visual check would miss. We photograph what we find so you’re not taking our word for it.
- 4
We explain what we found and what it means. We walk you through the findings, show the photos, and give you a straight answer on what needs fixing now, what can safely wait, and what’s simply normal wear. If nothing needs doing, we tell you that.
- 5
We put it in writing. You get a written report documenting the inspection level, findings, photos, and recommendations, so you have a record for insurance, a sale, or your own planning.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in University City?
Inspection pricing depends on the level you need, and the estimate is free. A typical Level 1 inspection in University City runs $125 to $250, while a Level 2 with camera scan for a real estate transaction or after a chimney fire typically runs $200 to $450. A Level 3 is priced per job because access varies so much, and we set that number in the written estimate before any work begins.
- Level 1 inspection: $125 – $250 typical
- Level 2 with camera scan: $200 – $450 typical
- Level 3 inspection: priced per job by written estimate
What moves the price is the level, whether the flue has offsets that make the camera run longer, and whether the chimney is on an exterior chase or an interior one where access changes. You avoid overpaying by knowing which level you actually need. If a sale or a post-fire check is what’s driving the visit, ask for a Level 2 up front rather than paying for a Level 1 first. Our estimate is free and itemized, and the written estimate sets the final price. Every recommendation comes with camera evidence, so you never have to take a dollar figure on faith. If the findings can safely wait until before next burn season, we’ll say so.
Chimney Inspection Near University City – Our Service Area
We connect homeowners across University City and the surrounding area with local chimney professionals, including Derita, Highland Creek, Hickory Grove, NoDa, Plaza Midwood, Elizabeth, Myers Park, Eastover, and out toward Harrisburg, Huntersville, and Concord. Response times depend on where you are and how the day is booked, so a call is the fastest way to know what’s available. For a fuller look at the region, see our chimney sweep service across University City.
Serving University City, NC – Our Local Coverage Area
We serve University City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in University City
A chimney inspection is a professional evaluation of your chimney and venting system’s condition, done at one of three levels depending on what needs to be assessed. It checks the firebox, flue, cap, crown, and the structure around the chimney, and it produces findings you can act on. It’s distinct from a sweep, which removes creosote; an inspection tells you what actually needs attention. Call (855) 658-5324 to book one.
A Level 1 usually takes 30 to 60 minutes, while a Level 2 with camera scan typically runs 60 to 90 minutes. A Level 3 takes longer because access has to be opened up, so we scope the time in the estimate. The visit length depends on the level and how much the camera has to cover. Call (855) 658-5324 for an exact quote.
Typical estimates run $125 to $250 for a Level 1 and $200 to $450 for a Level 2 with a camera scan, with Level 3 priced per job. The level you need, the flue layout, and access all affect the number. Our estimate is free and the written estimate sets the final price. Call (855) 658-5324 for an exact quote.
Yes, we work with Olympia Chimney, Famco, and Copperfield components, along with DuraFlex liners when relining is needed. Knowing how these parts wear helps us read an inspection accurately and recommend the right fix. We don’t favor a brand over what your chimney actually needs. Call (855) 658-5324 to talk through your setup.
Same-day inspection is often possible depending on the day’s bookings, so call and we’ll tell you what’s open. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a Friday evening call gets booked into the next opening. Call (855) 658-5324 to schedule.
We stand behind the accuracy of what we report, and the written report with photos is your record. The inspection itself is a diagnostic service, so its value is in the findings you can verify, not a parts warranty. Any repair we recommend carries its own materials and workmanship terms, spelled out in the estimate. Call (855) 658-5324 to go over the details.
Clear the area around the fireplace, make sure we can reach the hearth, and have any recent service records handy if you have them. If you know what you’ve noticed, like smoke rollback or a smell, mention it when you book. There’s nothing else you need to do; we handle the rest. Call (855) 658-5324 to set it up.
Schedule Your Chimney Inspection Service in University City Today
If something about your fireplace has been nagging at you, a chimney inspection answers the question with evidence instead of guesswork. We explain what we find, show you the photos, and tell you straight whether it needs fixing now or can wait. Call (855) 658-5324 for a free, no-obligation estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. For neighbors nearby, our chimney inspection and chimney inspection pages cover those areas too.
Written by the team at Chimney Sweep University City.