Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Concord
Concord’s chimneys carry two histories under one roofline. Around downtown, mill-village houses still hold their original brick stacks. Off Poplar Tent Road and Kannapolis Parkway, 1990s and 2000s subdivisions run factory-built inserts instead. A cap or crown that suits one often fails the other, and we know the difference on sight. Call (855) 658-5324 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Cap and crown work is preventive engineering. A crown sheds the rain that would otherwise track down your flue. A cap keeps animals, debris and water out at the top. When we look at a chimney in Concord, we look at what those two parts are protecting, which is everything below them.
Why Concord Homeowners Call Chimney Sweep University City for Chimney Cap & Crown
We serve Concord as part of our work across University City and the surrounding towns, and the calls we get from this city tend to be specific. Homeowners here notice things. A hairline crack in the crown, a cap that never sat flush, water staining in the firebox after a hard rain. They want someone who can explain what they’re looking at and name the material that fixes it.
Our technicians have up to 8 years of experience across the full chimney system, from sweeping to structural repair. That matters for cap and crown work because a crown doesn’t fail in isolation. We install DuraFlex liners and apply HeatShield ceramic resurfacing, and we work with recognized brands like Olympia Chimney and Copperfield for caps and crowns. The local pro we connect you with is licensed and insured as the state requires.
Response time to Concord is quick. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Estimates are free, and the price you see is the price per job, set by the written estimate before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Concord
The work below is what we do at the top of a chimney. All of it connects to the rest of the system, so we diagnose the whole chimney before recommending anything at the roofline.
Cap Installation in Concord
A properly installed cap covers the flue opening without blocking draft. In Concord’s mill-village homes near downtown, that’s not a store-bought job. The stack may have a single flue with an odd dimension, or multiple flues side by side, and the cap has to be fabricated to match. We work with Olympia Chimney and Copperfield for stainless and copper caps built to the actual opening.
Cap Replacement in Concord
Most caps fail for a reason you can trace. In the 28027 subdivisions, factory-built inserts often have a generic cap that never accounted for the insert’s flue collar, so it sits loose, rusts, or blocks draft. We replace it with one sized for the insert, and we check the firebox for the water damage a bad cap lets in.
Crown Repair in Concord
The crown is the concrete or mortar cap at the very top of the chimney. When it cracks, water gets behind the brick and down into the flue. In older Concord homes, we find original brick crowns that have spalled and split after decades of freeze-thaw. A proper crown repair rebuilds that surface with the slope and overhang it needs to shed water.
Crown Coating in Concord
A crown that’s still structurally sound but showing surface wear can be coated rather than rebuilt. Crown coating seals the small cracks before they widen. This is the less expensive path, and we’ll tell you plainly when it’s the right one and when it isn’t. No upsells. If we find something, we show you what it is and give you a straight answer on whether it needs fixing now.

Trusted Brands We Service in Concord
We work with a curated roster of professional-grade chimney brands: DuraFlex for flexible stainless relining, HeatShield for ceramic flue resurfacing, and Olympia Chimney, Famco and Copperfield for caps and crowns. When we specify a brand, it’s because that product fits your chimney, not because it’s what’s easiest to source. We don’t stock parts on a truck or in a warehouse. Each installation is ordered to your chimney’s dimensions, which keeps the turnaround predictable and the fit exact.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Concord Homes
- Original brick crowns spalling in mill-village homes. Decades of Concord freeze-thaw cycles crack and flake the original crown, and once water gets behind it, it travels down unlined flues and degrades the mortar joints. A crown repair paired with a reline recommendation is common here.
- Shared stacks in attached properties. When two homes share a chimney stack, a missing or undersized cap lets a neighbor’s appliance push creosote and fumes into an adjacent unit. A properly sized multi-flue cap on each flue opening is what stops that cross-contamination.
- Undersized caps on factory-built inserts. In the 1990s and 2000s subdivisions off Kannapolis Parkway, the insert’s flue collar doesn’t match a generic cap, so draft suffers and glazed creosote builds after only a few seasons of weekend fires.
- Unlined brick flues in older fireboxes. In the mill-village streets near downtown, we frequently find original fireboxes with no flue tile at all, just brick. Cap and crown work there often has to be paired with a full reline before the first burn.
Pricing for Chimney Cap & Crown in Concord, NC
Here’s what the work typically runs in the Concord market. A standard single-flue cap installation usually falls between $250 and $550. A custom-fabricated or multi-flue cap for an older or shared stack runs $450 to $900. Crown repair generally lands between $600 and $1,500 depending on the extent of the rebuild. Crown coating runs $400 to $800. A full crown rebuild on a large or complicated stack can go higher. What moves the number is stack size, flue count, cap material, and whether the crown needs structural reconstruction. A Level 2 inspection is included with the work so you see exactly why each line item is there. The written estimate sets the final price, and the estimate is free.
We Also Serve Cities Near Concord
We serve Concord and the surrounding towns, including Kannapolis, Harrisburg, University City and Hickory Grove. If you’re just outside the city limits, call and we’ll confirm coverage. Our chimney cap & crown team handles the full system, and you can read more about our work across Concord and the wider area. One call covers diagnostics through repair completion.
Serving Concord, NC – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Concord
Because the original stacks weren’t built to a standard dimension. In Concord’s mill-village homes, the flue openings are odd sizes, sometimes with multiple flues side by side, and a store-bought cap simply won’t seal them. A custom cap fabricated to the actual opening is the only way to keep water and animals out. Call (855) 658-5324 for a free estimate.
If the crown is structurally sound but shows surface cracks and flaking, coating is usually enough. If it’s cracked down to the brick or missing its slope, it needs repair. You can’t always see the difference from the ground, which is why we get on the roof and check. Call (855) 658-5324 for a free estimate.
Each flue opening needs its own properly sized cap, and each flue must be separated so no appliance vents into a shared passage. On a shared Concord stack, a multi-flue cap with individual flue covers is what stops a neighbor’s creosote and fumes from reaching your unit. We inspect both sides before recommending a setup. Call (855) 658-5324 for a free estimate.
Glazed creosote builds fast when draft is poor, and an undersized or generic cap on a factory-built insert is a common cause in Concord’s 28027 subdivisions. The cap doesn’t account for the insert’s flue collar, so draft suffers and creosote glazes after a few seasons of weekend fires. The fix is a manufacturer-specific cap paired with a proper sweep. Call (855) 658-5324 for a free estimate.
Yes, if the crown or flue condition is unknown. A Level 2 inspection is how we determine whether the flue is lined, whether the crown has damage beneath the cap, and whether the cap needs to be paired with a reline rather than installed on its own. Two of the four common Concord scenarios we see can’t be diagnosed without it. Call (855) 658-5324 for a free estimate.
Cap and crown work is the cheapest part of a chimney to get right and the most expensive to ignore. Water is patient. If you’re in Concord, whether it’s a mill house near downtown or a 1990s build off Poplar Tent Road, give us a call and we’ll tell you what your roof is really doing. Call (855) 658-5324 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep University City.