Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Concord
If your fireplace is smoking back into the room, your damper won’t close, or your gas logs won’t light, the fix starts with knowing what’s actually behind the brick. We’re Chimney Sweep University City, and we handle fireplace repair across Concord – from the mill-village streets near downtown to the subdivisions off Poplar Tent Road. Our technicians have up to 8 years of experience, and we scope every repair from what a camera shows, not from what a sales sheet says. Call (855) 658-5324 to book a visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Concord Homeowners Call Chimney Sweep University City for Fireplace Repair
Concord has a housing stock that splits cleanly in two, and that split shapes almost every repair call we take here. Around downtown, the old textile-mill houses carry masonry fireplaces that were built before modern flue standards existed – many with bare brick flues and no tile at all. Head north and east into the 28027 subdivisions off Poplar Tent Road and Kannapolis Parkway, and you’re looking at factory-built fireplaces and inserts from the 1990s and 2000s that need manufacturer-specific service.
We work both sides of that line. Our team handles wood burning fireplace repair, firebox repair, insert service, damper work, and gas pilot issues, and we work with a curated roster of professional-grade brands – DuraFlex, HeatShield, Olympia Chimney, Famco, Copperfield, Gelco – so the parts that go into your chimney are the same ones used by specialists nationwide. No referrals to a second contractor for follow-up work. One call covers diagnostics through repair.
The local reputation piece matters most to people who’ve been quoted a big liner job with no proof. We show you the camera footage. If nothing needs fixing, we say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Concord
Wood Burning Fireplace Repair
Wood burning fireplaces in Concord’s older homes are where we spend the most time, because the failures here are structural, not cosmetic. A bare-brick flue with no liner wicks creosote straight into the masonry, and spalling mortar narrows the passage until draft collapses and smoke rolls into the room. We diagnose the flue with a camera, then recommend a HeatShield resurfacing or a DuraFlex flexible liner sized to the firebox – the right call depends on what the footage shows, and we walk you through it.
Firebox Repair
The firebox takes the direct heat, and in mill-era Concord homes the original brick is often spalled, cracked, or missing mortar joints at the back wall. Repointing is sometimes enough. When the firebox itself is compromised, we rebuild the damaged sections with materials rated for the temperature, then handle any cosmetic repointing as a separate decision so you’re not paying for look-and-feel in the same invoice as safety work. We’ll tell you plainly when a firebox repair can safely wait.
Fireplace Insert Service
Factory-built inserts in the 28027 subdivisions off Poplar Tent Road and Kannapolis Parkway are a completely different animal. These units often reach third-degree creosote glaze after only a few seasons of weekend fires, and no brush will remove that – it takes a chemical sweep or, in bad cases, a targeted repair before the insert is safe to run. We service inserts to the manufacturer’s spec and check the flue connection, the surround seal, and the cap while we’re there.
Damper Repair
A damper that won’t seat is usually a symptom, not the problem. Water getting past a failing crown or flashing works its way down the stack, rusts the damper frame, and warps the plate until it hangs open. We repair or replace dampers, but we also find out why it failed, because replacing the damper without fixing the water source just means the new one fails too. That’s a repair we’d rather do once.
Trusted Brands We Service in Concord
We install and repair components from Olympia Chimney, Famco, DuraFlex, HeatShield, Gelco, and Copperfield – brands that certified chimney specialists nationwide rely on for liners, caps, dampers, and flue restoration. We don’t stock parts on a truck or keep a warehouse of components; what we do is specify the right product for your chimney based on the inspection, then install it to the manufacturer’s requirements. That keeps turnaround predictable and means the material in your flue is the grade the industry actually uses, not a generic substitute. If a repair calls for a specific DuraFlex liner size or a HeatShield ceramic application, we’ll name it in the written estimate before any work starts.

See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Concord Homes
Two very different chimney generations exist in this town, and the failures follow each one.
- Unlined bare-brick flues in mill-era homes near downtown. Original fireboxes in the early-1900s textile-mill houses often have no flue tile at all – just brick – so creosote soaks into the masonry itself and a brush-and-vacuum sweep never solves it. A full reline before the first burn is usually the honest recommendation.
- Third-degree creosote glaze in 1990s-2000s prefab inserts. The 28027 subdivisions off Poplar Tent Road bring factory-built fireplaces that build hard, shiny, glazed creosote after a few seasons of weekend use. No brush removes it; it takes chemical treatment or component replacement.
- Spalling mortar and failing crown or flashing. Concord’s cool, variable winters and wet spring cycles drive water into the stack through a cracked crown or failed flashing. The water then shows up as a damper that won’t seat and a smoke chamber that smokes back on every light.
- Venting appliances into the wrong stack. Older Concord homes sometimes vent a gas appliance into a flue that was never designed for it. That’s a Level 2 inspection question, not a repair guess, and it needs a trained eye.
Pricing for Fireplace Repair in Concord, NC
Here’s what fireplace repair typically runs in Concord. A damper repair or replacement commonly lands in the $180 to $420 range depending on the type. Firebox repointing and mortar repair usually runs $350 to $900 for a partial rebuild. Insert service with a chemical sweep for glazed creosote sits around $250 to $500. A HeatShield ceramic resurfacing typically runs $1,200 to $2,400, and a full DuraFlex liner installation usually falls between $2,800 and $5,500 depending on flue length and configuration. These are estimated ranges for the Concord market, not fixed prices – the written estimate you receive is what sets the final number, and the estimate itself is free. Nothing gets recommended without camera evidence you can see on-screen first.
We Also Serve Cities Near Concord
Our fireplace repair coverage extends beyond Concord into the surrounding communities – Kannapolis, Harrisburg, University City, and Hickory Grove. If you’re just outside the city limits, call and we’ll confirm coverage. For the full range of what we do, see our fireplace repair page, and for the broader picture of everything we handle around Concord, the city hub has you covered. One call covers diagnostics through repair across all of it.
Serving Concord, NC – Our Local Coverage Area
We serve Concord and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Concord
No – a bare-brick flue with no tile is not safe to burn in without a liner. In the early-1900s mill houses around downtown Concord, the original firebox often has no flue tile at all, just brick, which means creosote soaks into the masonry and the stack can’t contain a chimney fire the way a lined flue can. The fix is usually a HeatShield ceramic resurfacing or a DuraFlex liner sized to the firebox, confirmed by camera inspection first. Call (855) 658-5324 for a free estimate – we’ll show you the footage before recommending anything.
That shiny black coating is third-degree creosote, and it forms fast in factory-built inserts run with cool, smoldering fires or restricted air. In the 1990s-2000s subdivisions off Poplar Tent Road, a few seasons of weekend burning is often enough to glaze the flue, and no brush will take it off – it needs chemical treatment or component service. We inspect the insert, confirm the glaze with a camera, and quote the fix based on what we see. Call (855) 658-5324 to book an inspection.
You ask to see the camera evidence, and a legitimate company will show it to you without hesitation. Our rule is simple: nothing gets recommended without a Level 2 inspection and footage you can watch on the screen yourself. If the flue is sound, we say so, even when a reline would be an easier sale. If you’re in Concord and you’ve been quoted a liner job with no proof attached, get a second look – call (855) 658-5324 for a free estimate.
NFPA 211 is the national standard for chimneys, fireplaces, vents, and solid-fuel appliances, and it requires that a chimney be inspected and cleaned as needed, with any unlined or damaged flue brought up to a code-compliant condition before use. For a Concord mill-era firebox with no flue tile, that usually means a listed liner system; for a glazed prefab insert, it means the flue meets the appliance manufacturer’s spec. We test against that standard on every inspection. Call (855) 658-5324 for a free estimate.
It’s almost always a fireplace repair, not a chimney problem – a dirty thermocouple, a thermopile out of range, or a gas supply issue, not a flue defect. That said, if the gas fireplace is vented into an older Concord chimney, we check the venting at the same time because a blocked or improperly sized flue can cause the pilot to misbehave. We diagnose both sides in one visit. Call (855) 658-5324 for a free estimate.
Call (855) 658-5324 today for a free estimate on fireplace repair in Concord. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Nothing is recommended without camera evidence you can see for yourself, and we’ll tell you straight when a repair can safely wait.
Written by the team at Chimney Sweep University City.