Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Myers Park
Chimney cap and crown work in Myers Park is rarely a simple swap. Most of the homes here were built between the 1910s and 1930s, and their chimneys were designed for a different era of heating, often with two or more flues sharing a single tall brick stack. When a cap rusts through or a crown cracks, the fix has to account for every flue in that stack, not just the one you burn in. We know how these chimneys are put together, and we know the tall oaks and pines that overhang them. Call (855) 658-5324 and we’ll book a sweep or an inspection at a time that works for you. We answer 24/7.

Why Myers Park Homeowners Call Chimney Sweep University City for Chimney Cap & Crown
Most of the calls we take in Myers Park start the same way: something smells wrong in a room with no fireplace, or a neighbor’s smoke seems to drift down rather than up. That points to a shared stack with an unsealed crown or a failed cap, and it’s the kind of diagnosis a general handyman won’t make. We work on the whole chimney system, from the firebox floor to the crown, so the person who inspects your flues is the same one who repairs them. No referrals out to a separate mason.
We also work with professional-grade materials rather than whatever’s on a shelf. When a crown needs rebuilding, the mix and the cure matter, and when a flue needs relining we have DuraFlex and Gelco components available. A lot of single-service sweep companies stop at the brush. We don’t.
Response time to Myers Park is straightforward. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. The local pro who arrives is licensed and insured as North Carolina requires, and the estimate is free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Myers Park
Our chimney cap & crown team handles the full range of work, but in Myers Park the emphasis lands on three things: multi-flue caps, crown repair, and custom caps shaped to fit an old chimney’s proportions.
Multi-Flue Cap Installation
Myers Park’s shared and adjacent flues mean a neighbor’s furnace or water heater can vent into your stack when a cap fails or a crown cracks. A proper multi-flue cap seals every flue in the stack under one top with individual openings, isolating each one and restoring draft. This is the single most effective defense against cross-contamination between units in an attached property.
Crown Repair
A cracked or spalling crown lets water into the flue, which degrades mortar over time and opens a path for exhaust to seep sideways into the adjacent flue. We rebuild crowns with a proper slope and overhang so water sheds away from the brick rather than sitting at the joint. On a tall, ornate chimney, that rebuild is often as much about matching the original profile as it is about function.
Crown Coating
When a crown is sound but showing surface wear, a coating can extend its life without a full rebuild. It’s a judgment call, and we’ll tell you plainly which option makes sense for your chimney. Coating won’t fix structural cracking, and we don’t present it as if it will.
Custom Cap Fabrication
The Tudor and Georgian Revival chimneys here often have ornamental brickwork, corbels, or an unusual footprint that a stock cap won’t sit on cleanly. A custom cap solves that and still needs proper flashing. Poor flashing around a new cap on a tall ornate chimney can create leaks that look exactly like crown failure, so this step gets real attention.

Trusted Brands We Service in Myers Park
We work with Olympia Chimney, Famco, Copperfield, and DuraFlex, which are the same supply lines used by certified chimney specialists around the country. We don’t claim to stock parts locally. Instead, we specify the right component for your chimney, order it, and schedule the install so you’re not left waiting. If a stock multi-flue cap from Olympia Chimney fits your stack, that’s the practical choice. If your Georgian chimney top needs a custom footprint, we’ll have one fabricated. Either way, you get the correct answer for your chimney, not the closest box on a shelf.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Myers Park Homes
- Cracked or spalling crowns on shared stacks. Water gets into the flue, degrades the mortar, and eventually allows a neighbor’s appliance exhaust to seep into your adjacent flue. You’ll often notice it as an odor with no fire burning.
- A missing or rusted single-flue cap on one unit of a pair. The towering oaks and pines over Myers Park fill open chimneys with leaves and pollen, and a blockage on one flue changes the draft for both.
- Gaps at the crown joint in original clay-tile liners. These liners date to the 1910s – 1930s, and without a properly sealed multi-flue cap, cross-contamination between flues is common and hard to trace.
- Flashing failures around new caps on tall ornate chimneys. The dense canopy forces roof access, and improper flashing can produce leaks that mimic crown failure. That’s why we look at the whole top of the chimney, not just the cap.
Pricing for Chimney Cap & Crown in Myers Park, NC
Here’s how the numbers usually land in this neighborhood. A stock single-flue cap installation in Myers Park typically runs $150 – $350. A multi-flue cap for a shared or two-flue stack generally falls in the $400 – $900 range, and a custom cap shaped to a Tudor or Georgian chimney top often runs $700 – $1,500. Crown coating is usually $250 – $500. A full crown rebuild on a tall ornate stack runs $900 – $2,200, and that spread reflects how much original brickwork has to be matched. None of these are final. The written estimate sets the price, and the estimate is free.
We Also Serve Cities Near Myers Park
The same shared-flue and historic-chimney issues show up throughout the surrounding neighborhoods, so if you’re just outside Myers Park we can help. We serve Eastover, Elizabeth, Dilworth, and Plaza Midwood, and the older housing stock in each means the same emphasis on multi-flue caps and careful crown repair. Call (855) 658-5324 to book.
Serving Myers Park, NC – Our Local Coverage Area
We serve Myers Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Myers Park
A properly sealed multi-flue cap combined with a sound crown isolates each flue in the shared stack, so your neighbor’s appliance exhaust vents out rather than sideways into your flue. The crown does the work of keeping water and mortar gaps closed at the top, and the cap covers every flue opening under one top with separate lids. Together they restore proper draft on both sides. Call (855) 658-5324 for an exact quote – estimates are free.
Often yes, if the gaps are at the crown joint rather than mid-flue. A rebuilt crown with a proper slope and seal closes the top opening and stops water from entering. If a camera inspection shows deeper deterioration down the liner, a relining option like DuraFlex may be the right call instead. That’s why we inspect first and show you what we found. Call (855) 658-5324 for an exact quote – estimates are free.
The mature oaks and pines in Myers Park block ground-level viewing, so cap and crown work has to be done from the roof. That also means debris drops constantly into uncapped chimneys, which is why a cap pays for itself here faster than in a more open neighborhood. We plan the access and the flashing around the canopy, not around a ladder view. Call (855) 658-5324 for an exact quote – estimates are free.
Visible cracks, spalling brick at the top, or water stains inside the flue usually mean the crown itself needs attention, not just the cap. A new cap over a failed crown won’t stop moisture from getting in. If you’re seeing smoke odors from a neighbor’s unit, that’s another sign the crown seal has failed on a shared stack. Call (855) 658-5324 for an exact quote – estimates are free.
Yes. Custom caps are fabricated to the specific footprint of your chimney, which handles corbels, ornamental brickwork, and unusual proportions that a stock cap won’t fit cleanly. Olympia Chimney and Copperfield components are common choices for the fabrication, and we handle the flashing carefully since leaks there can look like crown failure. Call (855) 658-5324 for an exact quote – estimates are free.
If your cap is rusted through, your crown is cracking, or you suspect a shared stack is letting exhaust into your unit, call (855) 658-5324. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The local pro is licensed and insured as North Carolina requires, the estimate is free, and we won’t recommend work we can’t show you evidence for. Our technicians have up to 8 years of experience with chimneys like the ones in Myers Park.
Written by the team at Chimney Sweep University City.