Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in University City?
Chimney liner and rebuild work in University City typically runs $1,850 to $9,400, with most relining jobs landing between $2,400 and $5,200 and partial rebuilds between $3,800 and $9,400. A HeatShield ceramic resurfacing (when the existing flue is sound enough to restore rather than replace) usually costs $1,650 to $3,300. The written estimate sets the final price, and estimates are free.
We install DuraFlex flexible stainless liners and apply HeatShield resurfacing, and we work with Gelco, Olympia Chimney, Famco and Copperfield components for caps, crowns and structural repair. Our technicians have up to 8 years of experience. One call covers diagnostics through repair completion. Call (855) 658-5324. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A full stainless reline in University City is usually $2,400 to $5,200, depending on flue height, liner diameter and whether the flue is offset.
- HeatShield ceramic restoration costs less than a full reline: $1,650 to $3,300 when the flue is a candidate for resurfacing.
- Partial rebuilds (crown, top courses and flashing) run $3,800 to $9,400; full rebuilds cost more and are quoted per job.
- University City’s red clay soil moves with wet and dry cycles, and that ground movement shows up in chimney crowns and stacks as cracking.
- Free estimates. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturdays.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here are the ranges we see for University City chimney work. These are typical, estimated figures for the local market, not quotes. The written estimate you get on site is what sets your price.
| Work item | Typical cost range | What it covers |
|---|---|---|
| Level II inspection (before any liner decision) | $185 – $380 | Camera scan of the flue interior, crown, flashing and firebox |
| DuraFlex flexible stainless reline (single-story) | $2,400 – $3,600 | Insulated flexible liner sized to the appliance, top plate, cap |
| DuraFlex flexible stainless reline (two-story or offset flue) | $3,400 – $5,200 | Longer run, offset routing, additional support hardware |
| HeatShield ceramic flue resurfacing | $1,650 – $3,300 | Ceramic-based restoration of a sound but deteriorated clay flue |
| Liner for a wood stove insert or gas appliance | $2,200 – $4,100 | Correct-diameter liner, appliance connector, termination |
| Crown rebuild (replacement concrete crown) | $900 – $2,200 | Removal of failed crown, bond break, new crowned surface |
| Partial chimney rebuild (top courses, cap, flashing) | $3,800 – $6,700 | Masonry above the roofline rebuilt to code |
| Full chimney rebuild (above-roof stack through firebox repair) | $6,900 – $9,400+ | Full stack rebuild, flue reline, crown and cap included |
| Damper or firebox repair during rebuild | $420 – $1,300 | Damper replacement, firebox brick and mortar repair |
What drives the number up or down is almost always the condition of what’s underneath. A clay tile flue with one cracked tile in a straight run is a straightforward reline. The same flue where the tiles have shifted and the chimney has an offset is a longer job with more hardware and more time, which is why the two-story and offset range sits higher. Height matters too: a chimney on a two-story University City home takes longer to reach and work from than a single-story ranch, and that labor shows up in the estimate.
Material choice moves the price as well. A flexible stainless DuraFlex liner sized to your appliance is a different product than restoring the existing clay flue with HeatShield ceramic. When the flue is a candidate for resurfacing, that restoration usually costs less than a full reline and holds up well. When the tiles are gone or the flue is the wrong size for the appliance, a new liner is the answer, and no resurfacing product will fix a structural gap.
Finally, a rebuild is priced by how much masonry comes down. A crown rebuild is a tight job above the roofline. A partial rebuild takes the stack down to the roof line and rebuilds those courses. A full rebuild is a bigger scope that includes the flue, crown and cap together. We don’t quote any of these without seeing the chimney, because a photo won’t tell us if the mortar joints below the roofline are sound.
What Affects Chimney Liner & Rebuild Pricing in University City
- Flue height and offset. University City has plenty of two-story homes and homes with a chimney on an interior wall, and both mean a longer liner run. An offset flue adds routing work that a straight flue doesn’t need. That’s the single biggest swing between the $2,400 and $5,200 reline ranges.
- Condition of the existing clay tile. A liner is only as good as the flue it goes into. Cracked or spalled tiles often need to come out or be sealed before a new liner goes in, which adds labor. A Level II inspection with a camera is what tells us which situation you’re in, and it’s the cheapest line item in the table for that reason.
- Appliance type. A wood-burning fireplace, a wood stove insert and a gas appliance each need a different liner diameter and termination. Sizing the liner to the appliance is a code requirement, not a preference, and a liner that’s too large for the appliance drafts poorly and creosotes faster.
- Ground movement and clay soil. The Piedmont clay under University City swells when it’s wet and shrinks when it dries, and that seasonal movement shows up in chimney crowns and the masonry just above the roofline. A crown that has cracked and pulled away from the flue is one of the most common things we find here, and it’s also one of the reasons rebuilds come up during liner conversations.
- Masonry condition above the roofline. The top of a chimney takes the worst of the weather: sun, rain, and the freeze-thaw cycles that hit the Charlotte area most winters. Spalled brick and eroded mortar joints at the top of the stack are priced by how many courses need to come down and go back up.
- Chimney cap and crown scope. A rebuild that includes a new crown, a properly fitted cap and re-flashing is more work than a rebuild of the stack alone, but it’s also what keeps water out of the flue you just paid to reline. We treat cap and crown work as part of the job, not an add-on.
How to Save on Chimney Liner & Rebuild in University City
The biggest cost saver is finding problems before they cascade. A cracked crown left alone lets water into the masonry, and water in the masonry through a freeze is what turns a $900 crown job into a rebuild. Fixing the crown when it cracks is the cheapest thing you’ll ever do to your chimney.
Get the inspection before you decide on a liner. A Level II camera inspection costs a fraction of a reline and tells you whether you actually need a new liner, whether a HeatShield restoration will do, or whether the flue is fine and the problem is somewhere else entirely. Every year we find homeowners who were told they needed a reline by a sweep who never put a camera in the flue. You can read more about what that inspection covers on our Chimney Sweep University City page.
Bundle the liner and the crown. If the chimney is coming apart at the top anyway, doing the crown, cap and reline in one visit costs less than three separate trips, and it means the flue you reline is protected from the top down from day one. Ask for the whole scope in one written estimate so you can compare it properly.
Keep the annual sweep going after the work is done. Soot and creosote buildup doesn’t stop because the liner is new, and a liner that’s swept and inspected each year stays a liner for a long time. A soft brush and a camera once a year is the cheapest insurance a chimney has.
Estimates are free. Call (855) 658-5324 for a written estimate on liner or rebuild work. We’ll tell you what we find, what it needs, and what it will cost before anyone starts. No upsells. If we find something, we show you what it is and give you a straight answer on whether it needs fixing now.
How Does the Liner & Rebuild Process Work?
The process starts with an inspection. We run a camera down the flue, check the crown, the flashing at the roof line, the firebox and the damper, and we look at the masonry above the roofline from the roof. That inspection is what decides the scope: liner, resurfacing, rebuild, or some combination.
If a liner is the answer, we size the DuraFlex liner to the appliance, install it with the correct top plate and cap, and confirm the draft before we call the job done. If a HeatShield resurfacing is the right call, we prep the flue interior and apply the ceramic product, which restores a deteriorated clay flue without taking the chimney down. If the masonry above the roofline is the problem, we rebuild the affected courses, pour or form a new crowned top, re-flash, and cap it. From the firebox floor to the chimney crown, we service the entire system, and one call covers diagnostics through repair completion. No referrals to separate contractors for the follow-up work.
Chimney Liner & Rebuild FAQs
How much does chimney liner replacement cost in University City?
A DuraFlex flexible stainless liner in University City typically runs $2,400 to $5,200, with most single-story straight flues landing around $2,400 to $3,600 and two-story or offset flues at $3,400 to $5,200. The written estimate sets the final price. Call (855) 658-5324 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the flue is a candidate for it: HeatShield ceramic resurfacing at $1,650 to $3,300 versus a full reline at $2,400 to $5,200. Replacement becomes the cheaper option long-term when the clay tiles are missing, shifted or the wrong size for the appliance, because no coating will hold on a flue that isn’t structurally sound. The camera inspection is what tells you which one you’re looking at. Call (855) 658-5324 and we’ll walk you through what we find.
How much does a chimney rebuild cost in University City?
A partial rebuild in University City typically runs $3,800 to $6,700, and a full rebuild runs $6,900 to $9,400 or more. A crown-only rebuild is the lower-cost option at $900 to $2,200. Local clay soil movement and freeze-thaw cycles at the top of the stack are the usual reasons a rebuild gets on the table. Call (855) 658-5324 for a free estimate.
Do I need a permit for chimney liner or rebuild work in University City?
Most cities require a permit for structural chimney work, so ask the city’s building department what your job needs before work starts. Relining an existing flue is sometimes handled differently than rebuilding masonry above the roofline. We’ll tell you what we’re doing and what it involves so you can ask the right question. Call (855) 658-5324 to talk through the scope.
Can you come out today for a liner or rebuild estimate?
Same-day estimates are often possible in University City. Call (855) 658-5324. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturdays. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Why We’re the Right Call for Liner & Rebuild Work
A chimney liner and rebuild is not a job for a general handyman with a brush. It requires sizing a liner to the appliance, knowing when a flue can be restored and when it has to be relined, and rebuilding masonry above a roofline so it sheds water instead of absorbing it. We do all of it. Sweeping, inspection, fireplace repair, cap and crown work, and structural chimney repair are the five categories we cover, and a liner or rebuild job usually touches three of them. You don’t need to line up a mason, a sweep and a liner company for one chimney.
We work with a curated roster of professional-grade brands: DuraFlex for flexible stainless liner systems, HeatShield for ceramic flue resurfacing, and Gelco, Olympia Chimney, Famco and Copperfield for caps, crowns and structural components. Those are the same supply lines used by certified chimney specialists nationwide. Our technicians have up to 8 years of experience, and they’ll explain what they found with photos and a straight answer on what needs fixing now versus what can wait. That’s what a chimney inspection is for: a sweep is the first step, an inspection tells you what actually needs attention. Read more about our chimney liner & rebuild work and what to expect from a visit.
If you’re comparing estimates, ask each company whether the liner is sized to your appliance, whether the crown and cap are included, and whether they’ll show you the camera footage from the flue. Those three questions tell you more about an estimate than the bottom line does.
Call for a Free Chimney Liner & Rebuild Estimate
Whether you know you need a liner or you just know something’s wrong, the next step is the same: get someone to look at the chimney and tell you what it actually needs. Call (855) 658-5324 for a free estimate on liner and rebuild work in University City. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturdays. We’ll inspect the flue, show you what we find, and give you a written estimate that covers the whole scope in one place. If it needs fixing now, we’ll say so. If it can wait, we’ll tell you that too.
Written by the team at Chimney Sweep University City.
Pricing reflects the University City market as of 2026. Chimney Sweep University City offers free estimates – call (855) 658-5324.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Danika Bryant"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Steven Wong"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Erin Quinn